HDPE geomembrane liner in Canada

The construction of biogas digesters using geomembrane coverings provides a more cost-effective solution than steel or concrete enclosure systems-usually as low as one-eighth the price. Therefore, the use of geomembrane covers is becoming the most common form of this project. All geomembrane coverings are not equal, and their effectiveness requires some special qualities. HDPE geomembrane liners are the preferred product for lining projects.  HDPE liners are resistant to many different solvents and are the most widely used geomembrane liner in the world. Although HDPE geomembrane is less flexible than LLDPE, it provides higher specific strength and can withstand higher temperatures.  Its exceptional chemical and ultraviolet resistance properties make it an extremely cost-effective product with lower price.

Feature

Insulation thickness-must be sufficient to withstand extreme temperatures and fluctuations

Chemical resistance-must be resistant to animal manure and methane aqueous solutions

Puncture resistance-must be able to adapt to human and animal traffic

Low permeability-must be able to retain gas

Excellent long-term weatherability-must have excellent UV protection

Low hydraulic conductivity

Low gas and water vapor transmission rate

Project of our HDPE Geomembrane Liner in Canada

Customers contacted with us on alibaba(we have HDPE geomembrane price on it). The client said that he has a pig farm that emits a bad smell and hopes to improve the situation. After we understand this situation, we recommend that the customer build a biogas digester to turn waste into treasure. The client entrusted us with full responsibility for this project, including construction design, selection of geomembrane quality, and suggestions for installation. According to the local terrain, groundwater level and other factors, our technicians and engineers jointly designed the construction plan and the total quotation and sent it to the customer. For the later installation, our engineers were unable to pass due to the epidemic, so they contacted the local construction team for installation information. They let them negotiate the cost, and the customer is very satisfied.

In the construction design, first level the ground, dig a trench for the exhaust pipe at the bottom, and place a perforated PE pipe to discharge ground gas and upwelling groundwater to prevent the bottom from bulging. Then, a layer of 300gsm PET non-woven geotextile was laid on the ground to protect the HDPE geomembrane  liner buried pipe lining and prevent sharp objects on the ground from damaging the HDPE geomembrane pool lining.

On the geotextile, the HDPE geomembrane liner was formally laid. In this project, we recommend that customers use the new material HDPE geomembrane lining with a thickness of 1.5mm to ensure the quality of the project and the service life of the testing station.

After the lining of the HDPE geomembrane tank is welded and confirmed that there is no leakage, some perforated PE pipes are placed on the HDPE geomembrane to discharge the waste generated at the bottom of the biogas tank.

Finally, cover a layer of 1.5mm thick HDPE geomembrane liner on it to complete the sealing work. It has been delivered.

Unique Advantages of HDPE Geomembrane Liner of project

Impermeable HDPE geomembrane liner has its own unique advantages as the main material of landfill.

First of all, as a landfill closure film, geomembrane liner has high airtightness, because geomembrane is made of high-density polyethylene particles, and its product itself has high impermeability and gas impermeability, which can effectively It prevents the breeding of flies and bacteria, and at the same time ensures that the garbage in the landfill does not spread out.

Secondly, as a landfill closure film, geomembrane has high impermeability. The geomembrane laid on the garbage not only prevents the breeding of flies and bacteria and the diffusion of garbage odor, but also blocks water such as external rain and dew. The infiltration of groundwater prevents pollution of groundwater.

Finally, as a landfill closure film, geomembrane HDPE geomembrane liner has a very high service life. The geomembrane itself is not easy to decompose. If it is buried underground, its lifespan can reach more than 50 years, even if it is exposed to the outside, its lifespan can reach more than 10 years.

Specification of HDPE geomembrane liner in Canada

HDPE Geomembrane Liner thickness – 1.5 mm

Total Quantity – 12,000 Square meters

Each roll Size – 8m*100m

Standard – ASTM GRI GM13 standard

About HDPE Geomembrane Liner

HDPE Geomembrane (High-Density Polyethylene)

HDPE geomembrane liners are the preferred product for lining projects.  HDPE liners are resistant to many different solvents and are the most widely used geomembrane liner in the world. Although HDPE geomembrane is less flexible than LLDPE, it provides higher specific strength and can withstand higher temperatures.  Its exceptional chemical and ultraviolet resistance properties make it an extremely cost-effective product.

Benefits of HDPE Geomembrane:

The most chemically resistant member of the polyethylene family due to its dense configuration.

Field welded with hot wedge welders and extrusion welders. These factory quality welds are virtually stronger than the sheet itself.

No need to cover the liner because it is UV stable = cost-effective.

Available in roll stock and come in varying thicknesses ranging from 20 to 120 mil depending on your requirements. 

Detail and Application of HDPE Geomembrane Liner

Irrigation ponds, canals, ditches & water reservoirs

Mining heap leach & slag tailing ponds

Golf course & decorative ponds

Landfill cells, covers, & caps

Wastewater lagoons

Secondary containment cells/systems

Liquid containment

Environmental containment

Soil Remediation

Technical Notes:

HDPE is a very technical product to work with. It must be installed by certified welding technicians using specialized welding equipment to ensure performance.

Installations are temperature and poor weather sensitive.

40 mil HDPE liner requires extra effort to ensure that the subgrade is in excellent condition. It is suitable as an upgrade from products like the 20 mil RPE for larger installations and is an excellent secondary containment liner on multi-layer systems (for example; subgrade, geotextile layer, 40 mil HDPE layer, drainage net layer, 60 mil HDPE layer, geotextile layer, fill.)

60 mil HDPE liner is the staple of the industry and is suitable for most applications.

80 mil HDPE liner is a thicker design for more aggressive subgrades.

ABOUT LUYUAN-HDPE Geomembrane Liner Manufacturer

Shandong Luyuan Engineering Materials Co., Ltd. started in 2004, specializing in the development and production of geocell,geomembrane,geogrid, welded grid (PP, pet, steel plastic geogrid), geotextile, drainage board, and geotextile bag. Products have been exported to more than 30 countries and regions in the world!

LUYUAN is not only manufacturing best quality geosynthetic products but also providing professional design and installation service. OEM, ODM, custom development and fabrication are also available. If you have any questions or inquiries,  please contact with us, we will reply as soon as possible.